DC 6V Peristaltic Pump, Lab Aquarium Micro Peristaltic Pump, ID3mmxOD5mm, 65-150ml/min, Low Noise, for Biochemical Analysis, Pharmacy, etc(#3)

Features:100% brand new and Flow direction of peristaltic pump depends on the mode of connection of positive and negative terminal which you can choose randomly. It has been widely used in the fields of experiment, biochemical analysis, pharmacy, fine chemical industry, biological engineering, food, paper industry, etc. It is small and has the advantage of low noise and no pollution. It has and it is convenient to change pump pipe. Specification: Condition: 100% Brand New Applicable Power Supply: DC 6V Working Environment: 0-40℃ Pump Pipe(inner*outer diameter): #1 Approx. 1*3mm #2 Approx. 2 * 4mm / 0.1 * 0.2in #3 Approx. 3 * 5mm / 0.1 * 0.2in(Optional) Flow Range: 0-23ml/min, 0-65ml/min, 0-150ml/min Speed Range: 0.1-60rpm Current: 250-300 ma Motor Size: Approx. 32 * 23mm / 1.3 * 0.9in(diameter* height) Center Distance of Installation Hole : Approx. 48.5mm / 1.9in Package List: 1*Peristaltic Pump

• Parameters: Applicable power supply: DC 6V; Working environment: temperature 0-40℃; relative humidity <80%; equipped with pump tube: 3mm*5mm (inner diameter * outer diameter); range: 65-150ml/min ; Rotation speed range: 0.1-60rpm; Current: 250-300mA; Motor size: diameter 32mm* height 23mm; installation hole center distance: 48.5mm; miniature peristaltic pump weight: 0.15Kg.
• direction: The direction of the peristaltic pump depends on the connection method of the positive and negative poles, which can be selected arbitrarily.
• Application: The peristaltic pump is small in size, low in noise, and pollution-free. It has been widely used in experiments, biochemical analysis, pharmacy, fine chemicals, bioengineering, food, papermaking and other fields.
• High precision: no pollution, high precision, easy to replace the pump tube.
• Daily maintenance: In the process of daily use, try to replace the hose after a long time of use, so that it is not easy to cause the silicone tube to break, and the liquid will out of the hose and into the roller of the pump head, accompanied by corrosive liquid flowing into the gap of the roller. The pump head should be disassembled and cleaned in time to prevent it from freezing in the gap of the roller after weathering, which will cause the pump head to get stuck.